EXPLAINED
TECHNOLOGY
Friday, November 13, 2026
FAA ground stop was a network fault, not AI
A nationwide ground stop halted US departures for over four hours on 13 November, days after the FAA took its AI-based SMART tool national. The FAA blames an unstable legacy network, not AI.
KEY FACTS
- Ground stop, 3:54 to 8:15 pm ET
- 4h 21m
- Route control centres hit by instability
- 17 of 22
- Flights cancelled on the day, per the FAA
- 12,462
- Value of the 12-year SMART contract
- $875M
How it unfolded
At about 3:30 pm ET on 13 November, the FAA's legacy network was unstable, disrupting radar feeds and aircraft communications. A nationwide ground stop followed. About 3,500 aircraft in the air landed safely, and controllers kept some frequencies and radar feeds throughout.
The FAA says data flooded its network at roughly 1,000 connection attempts every four to five seconds. Early findings point to a radar set in Amarillo, Texas and a radio site in El Dorado, Arkansas, where provider L3Harris had been fitting a new router. Both sites were blocked and the network settled.
SMART, built by Air Space Intelligence, went nationwide three days earlier. The FAA calls it a data aggregator that feeds nothing into air traffic control, and the company says it played no part. The FAA and L3Harris are still probing the root cause.
Why it Matters
- 01
AI was not in the data path
The FAA says SMART shows data and does not feed controllers' systems.
- 02
Old equipment failed first
Legacy TDM gear became unstable once the network was flooded with data.
- 03
Scrutiny of SMART continues
Lawmakers had already sought a pause and clearer safety testing.
What we
learned
01
Timing is not causation: the AI tool launched days earlier, but the fault sat in old network gear.
02
Routine work at remote sites can cascade. The FAA will review when such work is done.
03
The root cause is unconfirmed by outside review. Questions about SMART's testing and oversight predate the outage and remain separate.